Find the publications within the project below
M4D publications:
2023:
“3D mapping of residual stresses in growing grains of partially recrystallized Gum Metal”, A. Lindkvist, W. Liu, D. Juul Jensen, Y. Zhang
“Application of Mask R-CNN for lab-based X-ray diffraction contrast tomography”, H. Fang, E. Hovad, Y. Zhang, D. Juul Jensen
“Characterization of Pt-coated twin paraboloidal laboratory capillary high energy x-ray optics”, A. Seret, J. Kehres, C. Gundlach, U. L. Olsen, H. F. Poulsen, D. Juul Jensen, M. Cordier, B. Stripe, W. Yun, Y. Zhang
“Dislocation Mechanisms and Local Strength with a View towards Sleeper Screw Failures”, K. Lin, L. Zhou, D. Juul Jensen, X. Zhang
“Effects of initial 3D printed microstructures on subsequent microstructural evolution in 316L stainless steel”, C. Zhang, D. Juul Jensen, T. Yu
“Recovery of deformation microstructure in the bulk interior revealed by synchrotron X-ray micro-diffraction”, T. Yu, C. Hong, Y. Zhang, A. Lindkvist, W. Liu, J. Tischler, D. Juul Jensen
2022:
“Local residual stresses and microstructure within recrystallizing grains in iron”, Y. Zhang, T. Yu, R. Xu, J. Thorborg, W. Liu, J. Tischler, A. Godfrey, D. Juul Jensen
“Microstructure and strength in ultrastrong cold-drawn medium carbon steel”, H. Feng, L. Cai, L. Wang, X. Zhang, F. Fang
“Finite element modelling of indentation testing in an AA1050 microstructure”, S. Goutianos, H. Pan, X. Zhang
"Texture in cold rolled and high-temperature annealed Cu foils", J. Guo, X. Li, G. L. Wu, R. Q. Zhang, T. L. Huang, H. F. Shi, C. L. Zhang, D. Juul Jensen, X. Huang
"Stored energy calculation in AA 1050 based on deformation microstructure from electron backscatter diffraction data", Y. Han, H. Pan, A. Godfrey, D. Juul Jensen, X. Zhang
"Recovery of small orientation gradients in a recrystallized grain observed in 3D during ex-situ annealing", C. Hong, Y. Zhang, T. Yu, W. Liu, D. Juul Jensen
"Registration of data from a multimodal investigation of particle stimulated nucleation in aluminum", E. F. F. Knipschildt, X. Lei, Y. B. Zhang, T. Yu, S. Fæster, W. Liu, R. E. Sanders, D. Juul Jensen
"Relationships between 3D grain structure and local inhomogeneous deformation: A laboratory-based multimodal X-ray tomography investigation", M. Kobayashi, Y. Zhang, H. Ishikawa, J. Sun, J. Oddershede, D. Juul Jensen, H. Miura
“Effect of Aging Treatment on the Microstructure and Mechanical Properties of Fe-Mn-Al-C Low Density Steel”, G. Y. Li, L. Kong, E. Z. Liu, X. D. Zhang, W. Q. Cao, Y. H. Wang
"An experimentally-based molecular dynamics analysis of grain boundary migration during recrystallization in aluminum", R. Li, E.R. Homer, C. Hong, Y. Zhang, D. Juul Jensen
"A CPFEM based theoretical analysis of strains resolved by the microstructural feature tracking method", R. Li, R. Quey, Y. Zhang, M. Kobayashi, J. Oddershede, D. Juul Jensen
"Twinning during recrystallization and its correlation with the deformation microstructure", F. Lin, Y. Zhang, A. Godfrey, D. Juul Jensen
"Recrystallization kinetics of cold rolled Gum Metal", A. Lindkvist, T. Holm Johansen, L. Kørup Pedersen, Y. Zhang, D. Juul Jensen
"In-situ X-ray microtomography of interface between additively manufactured aluminium bronze and H13 tool steel", H. Linga, Y. Zang, V. Brøtan, X. Ren, I. Westermann, B. Holmedal
"Evolution of microstructure and mechanical properties during annealing of heavily rolled AlCoCrFeNi2.1 eutectic high-entropy alloy", A. Lozinko, R. Gholizadeh, Y. Zhang, U. Klement, N. Tsuji, O. V. Mishin, S. Guo
"Effect of annealing on microstructure in railway wheel steel", D. Nikas, Y. Zhang, J. Ahlström
“Independent effects of laser power and scanning speed on IN718's precipitation and mechanical properties produced by LBPF plus heat treatment”, H. Pan, T. Dahmen, M. Bayat, K. Lin, X. Zhang
"Influence of shielding gas flow on the uniformity of additively manufactured martensitic stainless steel", Z. Pan, V. K. Nadimpalli, T. L. Christiansen, S. A. Andersen, M. B. Kjer, O. V. Mishin, Y. Zhang
"Indexing of superimposed Laue diffraction patterns using a dictionary-branch-bound approach", A. Seret, W. Gao, D. Juul Jensen, A. Godfrey, Y. Zhang
“Effect of inclusion type on the rotating bending fatigue properties of a high carbon chromium bearing steel”, Z. Shi, W. Cao, C. Shang, X. Zhang
“Influence Mechanisms of Inclusion Types on Rotating Bending Fatigue Properties of SAE52100 Bearing Steel”, Z. Shi, J. Li, X. Zhang, C. Shang, W. Cao
“Improve fatigue and mechanical properties of high carbon bearing steel by a new double vacuum melting route”, Z. Shi, H. Wang, Y. Gao, Y. Wang, F. Yu, H. Xu, X. Zhang, C. Shang, W. Cao
"Recrystallization kinetics of the AA5xxx series aluminum alloys - revisited", R. Vandermeer, F. Lin, X. Lei, R. E. Sanders, D. Juul Jensen
“Tensile deformation-induced twinning in an austenitic low density steel over a wide range of temperature”, H. Wang, J. Liang, Z. Shi, C. Wang, X. Zhang, W. Cao
"Effects of alloying, microstructure and texture on the strength–ductility trade-off in layered aluminum", Y. P. Xia, H. Wu, K. S. Miao, L. Geng, G. H. Fan, T. Yu, D. Juul Jensen
"Tailoring the microstructure to enhance the cryogenic mechanical properties of a Fe–34.5Mn–0.04C steel", J. Xiong, Y. Wang, Y. Zhang, T. Wang, Y. Peng, A. Godfrey, N. Hansen, X. Huang
“Heterogeneous lamellar-structured high manganese steel with excellent tensile properties”, J. C. Xiong, J. F. Zhao, L. Kong, H. K. Yang, X. D. Zhang, Y. H. Wang
"Microstructural evolution during recovery of deformed aluminium—Effect of deformation strain", T. Yu
"The effect of voids on boundary migration during recrystallization in additive manufactured samples—a phase field study", C. Zhang, V. Yadav, N. Moelans, D. Juul Jensen, T. Yu
"Stress relief during annealing of railway wheel steel characterized by synchrotron X-ray micro-diffraction", Y. Zhang, C. Jesop, D. Nikas, T. Yu, W. Liu, J. Ahlström
"Quantification of room temperature strengthening of laser shock peened Ni-based superalloy using synchrotron microdiffraction", G. Zhou, Y. Zhang, W. Pantleon, J. Kou, U. Ramamurty, X. Tan, S. Luo, W. He
2021:
"Analysis of Sleeper Screw Failures", X. Zhang, Y. Zhang, C. J. Rasmussen, M. T. Lange, D. Juul Jensen
"In Situ Synchrotron X-ray Micro-Diffraction Investigation of Elastic Strains in Laminated Ti-Al Composites", T. Yu, Y. Du, G. Fan, R. Barabash, D. Juul Jensen, Y. Zhang
"Deformation Mechanisms in Tool–Workpiece Asperity Contact in Metal Forming", C. Nielsen, X. Zhang, M. Moghadam, N. Hansen, N. Bay
"Microstructure and strengthening mechanisms of nanolamellar structures in ultrastrong drawn iron wires", H. Feng, L. Wang, S. Cui, N. Hansen, F. Fang, X. Zhang
"Microstructure Evolution and Tensile Properties of Cold-Rolled and Annealed Fe-30Mn-0.14C-7Cr-0.26Ni Steel", X. Chen, J. Zhang, J. Xiong, Y. Wang, Y. Zhang, T. Wang, Y. Peng
“Quantitative Comparison of the Recrystallization Kinetics of Two Industrially Processed 5xxx Aluminum Alloys", X. Lei, R. E. Sanders, X. Yang, F. Lin & D. J. Jensen
”Effects of dislocation boundary spacings and stored energy on boundary migration during recrystallization: A phase-field analysis", V. Yadava, N. Moelans, Y. Zhang, D. Juul Jensen
"Strain distribution and lattice rotations during in-situ tension of aluminum with a transmodal grain structure", W. Q. Gao, C. L. Zhang, M. X. Yang, S. Q. Zhang, D. Juul Jensen, A. Godfreya
”A phase-field investigation of recrystallization boundary migration into heterogeneous deformation energy fields: Effects of dislocation boundary sharpness”, R. Li, V. Yadav, N. Moelans, Y. Zhang, D. Juul Jensen
”Microstructure and Texture Evolution During Cold Rolling of 316L Stainless Steel”, C. Zhang, D. Juul Jensen, T. Yu
”3D mapping of orientation variation and local residual stress within individual grains of pearlitic steel using synchrotron dark field X-ray microscopy”, C. Yildirim, C. Jessop, J. Ahlström, C. Detlefs, Y. Zhang
”Investigation of Relationships between Grain Structure and Inhomogeneous Deformation by Means of Laboratory-Based Multimodal X-Ray Tomography: Strain Accuracy Analysis”, M. Kobayashi, Y. Zhang, H. Ishikawa, J. Sun, J. Oddershede, D. Juul Jensen, H. Miura
”Improved grain mapping by laboratory X-ray diffraction contrast tomography”, H. Fang, D. Juul Jensen, Y. Zhang
”Recrystallization boundary migration in the 3D heterogeneous microstructure near a hardness indent”, C. Hong, Y. Zhang, A. Lindkvist, W. Liu, J. Tischler, R. Xu, D. Juul Jensen
”Deep learning for improving non-destructive grain mapping in 3D”, H. Fang, E. Hovad, Y. Zhang, L. K. H. Clemmensen, B. Kjaer Ersbøll, D. Juul Jensen
"Enhanced strength in pure Ti via design of alternating coarse- and fine-grain layers", D. Li, G. Fan, X. Huang, D. Juul Jensen, K. Miao, C. Xu, L. Geng, Y. Zhang, T. Yu
"Influence of geometrical alignment of the deformation microstructure on local migration of grain boundaries during recrystallization: A phase-field study", V. Yadav, N. Moelans, Y. Zhang, D. Juul Jensen
"Interactions between Dislocations and Boundaries during Deformation", H. Pan, Y. He, X. Zhang
"In-situ synchrotron X-ray micro-diffraction investigation of ultra-low-strain deformation microstructure in laminated Ti-Al composites", Yu T, Du Y, Fan G, Xu R, Barabash R, Hansen N, Huang X, Zhang Y
"Importance of deformation-induced local orientation distributions for nucleation of recrystallisation", R. Quey, G. Fan, Y. Zhang, D. Juul Jensen
"Optimizing laboratory X-ray diffraction contrast tomography for grain structure characterization of pure iron", A. Lindkvist , H. Fang, D. Juul Jensen, Yubin Zhang
"Segregation and precipitation stabilizing an ultrafine lamellar-structured Al-0.3%Cu alloy", Linfei Shuai, Tianlin Huang, Tianbo Yu, Guilin Wu, Niels Hansen, Xiaoxu Huang
2020:
"Residual strain–stress in manganese steel railway crossing determined by synchrotron and laboratory X-rays", S. Dhar, H. K. Danielsen, R. Xu, Y. Zhang, F. B. Grumsen, C. Rasmussen, D. Juul Jensen
"Unsupervised Deep Learning for Laboratory-Based Diffraction Contrast Tomography" E. Hovad, H. Fang, Y. Zhang, L. K. H. Clemmensen, B. K. Ersbøll, D. Juul Jensen
"A flexible and standalone forward simulation model for laboratory X‐ray diffraction contrast tomography", H. Fang, D. Juul Jensen, Y. Zhang, Acta Crystallographica Section A: Foundations and Advances
"Particle stimulated nucleation revisited in three dimensions: a laboratory-based multimodal X-ray tomography investigation", X. Lei, Y. Zhang, J. Sun, F. Bachmann, X. Yang, R. E. Sanders, D. Juul Jensen
"Surface patterning for combined digital image correlation and electron backscatter diffraction in-situ deformation experiments", S. Zhang, A. W. Godfrey*, C. Zhang, W. Liu, D. Juul Jensen
"Melting route effects on the rotatory bending fatigue and rolling contact fatigue properties of high carbon bearing steel SAE52100", Z. Cao, Z. Shi, B. Liang, X. Zhang, W. Cao, Y. Weng
"Heavily cold drawn iron wires: Role of nano-lamellae in enhancing the tensile strength", H. Feng, F. Fang, X. Zhou, X. Zhang, Z. Xie, J. Jiang
"Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel", Z. Cao, T. Liu, F. Yu, W. Cao, X. Zhang, Y. Weng
"Microstructural evolution in Mg-3Gd during accumulative roll-bonding", X. Luo, Z. Feng, T. Yu, T. Huang, R. Li, G. Wu, N. Hansen, X. Huang
"Multi-axial Fatigue of Head-Hardened Pearlitic and Austenitic Manganese Railway Steels: A Comparative Study", S. Dhar, J. Ahlström, X. Zhang, H.K. Danielsen, D. Juul Jensen
"Subgrain dynamics during recovery of partly recrystallized aluminium", S. R. Ahl, H. Simons, C. Detlefs, D. Juul Jensen & H. F. Poulsen
"Unusual through-thickness variations of microstructure and texture in heavily rolled and annealed Al–0.3%Cu", L. F. Shuaia, T. L. Huanga, G. L. Wua, G. Wintherc, X. Huanga, and O. V. Mishina
"Dislocation density in fine grain-size spark-plasma sintered aluminum measured using high brightness synchrotron radiation", C. L. Zhang, A. Godfrey, Y. Zhang, G. L. Wu, R. Xu, W. Liu, D. Juul Jensen
"Impact of 3D/4D methods on the understanding of recrystallization", D. Juul Jensen, Y.B.Zhang.
"Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd", X. Luo, Z. Feng, T. Yu, J. Luo, T. Huang, G. Wu, N. Hansen, X. Huang
"Deformation Microstructure and Recovery", T. Yu
"Microstructure and strengthening mechanisms of 90We7Nie3Fe alloys prepared using laser melting deposition", Y. P. Wang, S. Y. Ma, X. S. Yang, Y. Z. Zhou, X. Liu, J. F. Li, J. J. Zhang, C. Li, X. Y. Wang, G. M. Le, Y. Zhang
"Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys", A. Lozinko, Y. Zhang, O. V. Mishin, U.Klement, S. Guo
2019:
"Effect of strain gradient on the microstructure and mechanical properties of pearlitic steel", J. Ahlström and X. Zhang.
"Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment", Nan Chen, Guoqiang Ma, Wanquan Zhu, Andrew William Godfrey, Zhijian Shen, Guilin Wu and Xiaoxu Huang.
"An efficient method to improve the spatial resolution of laboratory X-ray diffraction contrast tomography", H Fang, D Juul Jensen and Y Zhang.
"Visualization of low-misorientation dislocation structures from orientation data using customized All-Euler maps", C Hong.
"Microstructure and strength of weldment in Pt20Rh alloys dispersion-strengthened by ZrO2 particles", F. Hu, Z. Wang, T. Yu, Z. Yang, G. Wei, X. Luo, N. Hansen, X. Huang and W. Xie.
"Pt-20Rh dispersion strengthened by ZrO2 - Microstructure and strength", F. Hu, T. Yu, W. Liu, Y. Yang, G. Wei, X. Luo, H. Tang, N. Hansen, X. Huang and W. Xie
"Quantification of recrystallization kinetics in industrially processed 5xxx aluminum alloy sheet", X C Lei, R E Sanders, X F Yang and D. Juul Jensen.
"Quantification of microstructure in a eutectic high entropy alloy AlCoCrFeNi2.1", A. Lozinko, O. V. Mishin, T. Yu, U. Klement, S. Guo and Y. Zhang.
"Grain size effect on deformation mechanisms in Mg-3Gd", X. Luo, J. Q. Luo, Z. Q. Feng, F. P. Hu, T. Yu, C. Berggreen, G. L. Wu, N. Hansen and X. Huang
"Comparison of local stress and strain in a heterogeneouslycompressed AA 1050 ring by electron microscopy, microhardness and finite element modelling", C. V. Nielsen, N. Hansen and X. Zhang
"Integral mean curvature analysis of 3D grain growth: Linearity of dV/dt and grain volume", BR. Patterson, RT. DeHoff, CA. Sahi, J. Sun, J. Oddershede, F. Bachmann, 0.E Lauridsen and D. Juul Jensen.
"Recovery kinetics in Al-0.3%Cu after heavy rolling", L. F. Shuai, T. L. Huang, G. L. Wu, N. Hansen, X. Huang and T. Yu
"Grain boundary wetting correlated to the grain boundary properties: A laboratory-based multimodal X-ray tomography investigation", J. Sun, Y. Zhang, A. Lyckegaard, F. Bachmann, E.M. Lauridsen, D. Juul Jensen.
"Aging of 3D-printed maraging steel", E G Thorsteinsdóttir, D S Primdahl, Y B Zhang, D Juul Jensen and T Yu.
"A unified model for microstructural coarsening of deformed metals", T Yu.
"Strong pinning of triple junction migration for robust high strain nanostructures", T. Yu & D. A. Hughes.
"Investigation of plastic yielding in near-micrometer grain size aluminum using synchrotron microdiffraction", C.L. Zhang, A Godfrey, W.Q. Gao, Y.B. Zhang, G.L. Wu, W. Liu, R.Q. Xu and D. Juul Jensen.
"Alignment of sample position and rotation during in situ synchrotron X-ray micro-diffraction experiments using a Laue cross-correlation approach" , C. Zhang, Y. Zhang, G. Wu, W. Liu, R. Xu, D. Juul Jensen and A. Godfreya.
"Exploring high strength metallic materials: a lesson from pearlitic steel wire", X Zhang.
"Quantification of local boundary migration in 2D/3D", Yubin Zhang.
Other publications:
“MEMS micro-coils for magnetic neurostimulation”, 2023, X. Liu, A. J. Whalen, S. B. Ryu, S. W. Lee, S. I. Fried, K. Kim, C. Cai, M. Lauritzen, N. Bertram, B. Chang, T. Yu, A. Han
“Contribution of grain boundary to strength and electrical conductivity of annealed copper wires”, 2023, L. Dong, F. Yang, T. Yu, N. Zhang, X. Zhou, Z. Xie, F. Fang
“Microstructures and Mechanical Properties of Ductile Cast Iron with Different Crystallizer Inner Diameters”, 2022, J. Bai, H. Xu, Y. Wang, X. Chen, X. Zhang, W. Cao, Y. Xu
“Continuous dynamic recrystallization in a Zn–Cu–Ti sheet subjected to bilinear tensile strain”, 2022,M. Leonard, C. Moussa, A. Roatta, A. Seret, J. W. Signorelli
"Three-dimensional grain resolved strain mapping using laboratory X-ray diffraction contrast tomography: theoretical analysis", 2022, A. Lindkvist,Y. Zhang
"Laboratory-scale gas atomizer for the manufacturing of metallic powders", 2022, D. C. del Rio, D. Juul Jensen, T. Yu, N. S. Tiedje
“Crack initiation induced by twin-martensite and inclusion in rotatory bending fatigue of a high nitrogen martensite bearing steel”, 2022, Z. Shi, H. Xu, C. Wang, J. Liang, C. Shang, X. Zhang, A. Godfrey, W. Cao
“Excellent strength and electrical conductivity achieved by optimizing the dual-phase structure in Cu–Fe wires”, 2022, F. Yang, L. Dong, L. Zhou, N. Zhang, X. Zhou, X. Zhang, F. Fang
”Microstructure and properties of cold-drawn Cu and Cu-Fe alloy wires”, 2022, F. Yang, X. Zhang, F. Fang
"Heterogeneous microstructure and failure analysis of yaw gear rings", 2022, X. Zhang, N. L. Pedersen, P. Klit, D. Juul Jensen
"Local residual stresses and microstructure within recrystallizing grains in iron", 2022, Y. Zhang, T. Yu, R. Xu, J. Thorborg, W. Liu, J. Tischler, A. Godfrey, D. Juul Jensen
"Structure restoration and coarsening of nanocrystalline cementite in cold drawn pearlitic wire induced by low temperature annealing", 2022, L. Zhou, F. Fang, M. Kumagai, E. Pickering, T. Yu, X. Zhang
”Achieving ultrahigh strength in pearlitic steel wire through heavy drawing”, 2022, L. C. Zhou, F. Fang, X. Zhang
"Analysis of Sleeper Screw Failures", 2021, X. Zhang, Y. Zhang, C. J. Rasmussen, M. T. Lange, D. Juul Jensen
"Micropitting and microstructural evolution during gear testing -from initial cycles to failure", 2021, D. Mallipeddi, M. Norell, V. M. S. Naidu, X. Zhang, M. Näslund, L. Nyborg
"Quantification of local dislocation density using 3D synchrotron monochromatic X-ray microdiffraction", 2021, G. Zhou ,W. Pantleon, R. Xu, W. Liu, C. Chen, Y. Zhang
”Fabrication of Low Roughness Gradient Nanostructured Inner Surface on an AISI 304 Stainless Steel Pipe via Ultra-Sonic Rolling Treatment (USRT)”, 2021, X. Han, C. Li, C. Chen, X. Zhang, H. Zhang
"Intelligent Quality Assessment of Railway Switches and Crossings", 2021, R. Galeazzi , H. K. Danielsen, B. K. Ersbøll, D. Juul Jensen, I. F. Santos
"Metallurgical investigation of crossing noses", 2021, H. K. Danielsen, S. Dhar, C. J. Rasmussen, D. Juul Jensen
"Present state and future vision for three-dimensional microstructural characterization of metallic materials: Experimental methods and scientific results", 2020, D. Juul Jensen
"Recent trends in X-ray-based characterization of nodular cast iron",2020,T. Andriollo, C. Xu, Y. Zhang, N. S. Tiedje, J. Hattel
"Continuous dynamic recrystallization in a Zn–Cu–Ti sheet subjected to bilinear tensile strain", 2020, M. Leonard, C. Moussa, A. Roatta, A. Seret, & J. W. Signorelli.
"Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method" 2020, C. L. Xu, T. Andriollo, Y. B. Zhang, J. C. Hernando, J. Hattel, N. S. Tiedje
"Impact of local Si segregation on strain localization in ductile cast iron", 2020, C. L. Xu, T. Andriollo, F. Lin, Y. B. Zhang, J. Hattel, N. S. Tiedje
"The synergy of boundary engineering and segregation strategy towards high strength and ductility Mg-3Gd alloy", 2020, Xuan Luo, Zongqiang Feng*, Rui Fu, Tianlin Huang, Guilin Wu, Xiaoxu Huang
"Building on Discovery: A Preview of 3DMS 2020", 2020, D. Juul Jensen, M. P. Miller, L. Zhang
"Deformation mechanisms in meta-stable and nitrogen-stabilized austenitic stainless", 2020, B. Wang, C.Hong, G. Winther, T. L. Christiansen, M. A. J. Somers, Elsevier B.V.
"Characterization, formation and development of scales on L80 steel tube resulting from seawater injection treatment", 2020, Y. Yang, X. Luo, C. Hong, A. Yadav, M. Rogowska, R. Ambat, Elsevier B.V.
"Microstructural evolution in Mg-3Gd during accumulative roll-bonding", 2020, X. Luo, Z. Feng, T. Yu, T. Huang, R. Li, G. Wu, N. Hansen, X. Huang
"Simultaneous enhancement of strength and ductility in a fine-grained Fe-30Mn-0.11C steel at 77 K.", 2019, Y. Wang, J. Kang, X. Chen, T. Yu, N. Hansen and X. Huang
"Enhanced heat transfer in tubes based on vascular heat exchangers in fish: Experimental investigation", 2019, K. Navickaitė, A. Mocerino, L. Cattani, F. Bozzoli, C. Bahl, K. Liltrop, X. Zhang, K. Engelbrecht, International Journal of Heat and Mass Transfer
"Local stress and strain in heterogeneously deformed aluminum: A comparison analysis by microhardness, electron microscopy and finite element modelling", 2019, X. Zhang, C. V. Nielsen, N. Hansen, C. M.A. Silva, P. A.F. Martins
"2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing", 2019 S. Dhara,∗, H. K. Danielsena, S. Fæstera, C. Rasmussenb, Y. Zhang
"Impact of micro-scale residual stress on in-situ tensile testing of ductile cast iron: Digital volume correlation vs. model with fully resolved microstructure vs. periodic unit cell", 2019 T. Andriollo, Y. Zhang , S. Fæster, J. Thorborg, J. Hattel
"Crack formation within a Hadfield manganese steel crossing nose", S. Dhar, H. K. Danielsen, S. Fæster, C.J. Rasmussen, Y. Zhang, D. Juul Jensen.
"Enhanced structural refinement via intermediate annealing in cold rolled Al-2%Cu", 2019, Keming Du, Tianlin Huang, Guilin Wu, Niels Hansen and Xiaoxu Huang.
"Additive manufacturing of metal components – process-material interaction in different process chains", 2019, H. N. Hansen, J. H. Hattel, D. B. Pedersen, S. Mohanty, S. A. Andersen, V. K. Nadimpalli, C. G. Klingaa, T. Dahmen and Y. Zhang.
"Damage evolution around white etching layer during uniaxial loading", 2019, Casey Jessop, Johan Ahlström, Christer Persson, Yubin Zhang.
"Combined effects of source hardening and activation of new slip systems on simultaneous enhancement of strength and ductility in fine-grained Mg-3Gd alloy", 2019, X. Luo, G. Wu, Z. Feng, J. Luo, T. Yu, T. Huang, N. Hansen, X. Huang.
"Microstructural evolution of Ta-4%W during cold rolling", 2019, Guoqiang Ma, Andrew Godfrey, Qiang Chen, Guilin Wu, Darcy A. Hughes and Niels Hansen.
"Local residual stress in partially recrystallized iron characterized using high resolution electron backscatter diffraction", 2019, T Wang, D Juul Jensen, A Godfrey and Y Zhang.
"Simultaneous enhancement of strength and ductility in a finegrained Fe-30Mn-0.11C steel at 77 K", 2019, Y H Wang, J M Kang, X M Chen, T Yu, N Hansen and X Huang.
"Post heat-treatment enhancement of additive manufactured 316L stainless steel", 2019, Guilin Wu, Nan Chen, Andrew Godfrey, Zhijian Shen, Xiaoxu Huang.
"Deformation microstructures and strength of face-centered cubic high/medium entropy alloys", 2019, Shuhei Yoshida, Takuto Ikeuchi, Yu Bai, Akinobu Shibata, Niels Hansen, Xiaoxu Huang and Nobuhiro Tsuji.
"Microstructure and residual elastic strain at graphite nodules in ductile cast iron analyzed by synchrotron X-ray microdiffraction", 2019, Y.B. Zhang a, T. Andriollo, S. Fæster, R. Barabash, R. Xu, N. Tiedje, J. Thorborg, J. Hattel, D. Juul Jensen, N. Hansen.
"Thermal stability of laser shock peening processed Ni-based superalloy DZ17G", G. Zhou, H. Shen, W. Zhu, N. Tamura, K. Chen and Y. Zhang.
"Gradient Microstructure in a Gear Steel Produced by Pressurized Gas Nitriding", R. Yang, G. Wu, X. Zhang, W. Fu, N. Hansen, X. Huang
"Grain size effect on the mechanical behavior of metastable Fe-23Cr-8.5Ni alloy", L. Xie, C. Wang, Y. Wang, G. Wu, & X. Huang
"Heterogeneous microstructure and enhanced mechanical properties in annealed multilayered IF steel", X. Jiang, L. Zhang, T. Huang, G. Wu, X. Huang, & O.V. Mishin.
"Unprecedented strength in pure iron via high-pressure induced nanotwinned martensite", H. Zhang, Y. Wang, Y. Peng, P. Zhu, J. Liu, Z. Feng, G. Wu & X. Huang.
"Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment", N. Chen, G. Ma, W. Zhu, A. W. Godfrey, Z. Shen, G. Wu, & X. Huang.
"High Resolution Mapping of Orientation and Strain Gradients in Metals by Synchrotron 3D X-ray Laue Microdiffraction", Y. Zhang, R. I. Barabash
"Grain boundary mobilities in polycrystal", 2020, J. Zhanga, W. Ludwig, Y. Zhang, H. H. B. Sørensen, D. J. Rowenhorst, A. Yamanaka, P. W. Voorhees, H. F. Poulsen
"Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron", T. Andriollo, Y. Zhang, S. Fæster, V. Kouznetsova
"Damage evolution around white etching layer during uniaxial loading", Casey Jessop, Johan Ahlström, Christer Persson, Yubin Zhang
"X-ray tomography, digital volume correlation and FE modelling: A synergistic combination to study the processing-structure-property relations in ductile iron", T. Andriollo*, Y. Zhang, S. Fæster, J. Thorborg, N. S. Tiedje, V. Kouznetsova, J. Hattel